Post up any new Mod's you've done to the JK!! (WITH PICS IF YOU'VE GOT THEM!!)
What did you do to your JK this week?
HOGGSTATUS
1,701 - 1,720 of 4,188 Posts
Joined
·
2,465 Posts
That's nice looking. Stock skids are suprisingly strong aren't they?
Joined
·
3,326 Posts
Looks good brother.
Joined
·
1,459 Posts
One additional question - do you drive around with your winch controller plugged in.Craig wanted to see the diet I put my bumper on.
Started with a Smittybilt SRc bumper, Cut the wings off, going from this:
![Image]()
to this:
![Image]()
That trimming will make a big difference. Now, go after the sideburns on that rig next.
Joined
·
1,459 Posts
Good idea - bring it over next week we can weld up all the caps and covers. Make sure you give that lower battering ram (tie rod) some attention as well.I never know when Ill get stuck on a curb or in a pothole.
My next trim is the bottom of the bumper, Ill cut at the white lines then put plate over the exposed area on the sides. Makes the bottom almost 6 inches narrower overall.
![Image]()
When are we going back in and test out the improvement?
Yeah tie rod is looking ugly as of late. How hard to build one with heims? My tre's are pretty sloppy.
We can go back out when I get tires.
Joined
·
1,459 Posts
I know nothing about Dana 30 tierods.
Those tires are trail proven monsters. To use your eloquent words of late, don't be a *****.
And I only have 4 left, remember?I know nothing about Dana 30 tierods.
Those tires are trail proven monsters. To use your eloquent words of late, don't be a *****.
Maybe you can look at the tie rod and see if we can come up with something.
Joined
·
1,459 Posts
10-4, easy fall project for under a $100.
Joined
·
1,338 Posts
Joined
·
1,338 Posts
Yeah same here mark I work for beer.
Sent from my SPH-D710 using Tapatalk 2
Sent from my SPH-D710 using Tapatalk 2
A spare 31" mtr for a 16" rim?
Not mine but today at work I lowered/leveled a 07 srt8 GC that recently had a modded 440 dropped in!
Extremely fun and torquey ride! Stupid low end and quick. Guy does need a diff stall converter since it wants to pull threw the brakes, you kinda have to two foot it HaHa
![Image]()
![Image]()
Extremely fun and torquey ride! Stupid low end and quick. Guy does need a diff stall converter since it wants to pull threw the brakes, you kinda have to two foot it HaHa
Joined
·
1,846 Posts
So I couldn't shut the key off after I went thru the Rubicon. Had to disconnect the battery to get it off of the keyed accessories. Here is the mess I had going on the fix it. What a pain in the ass!!!
![Image]()
It was the little cable that goes from the shifter to the key to tell it is in park. Friggin plastic shit clip.
Ordered RCV's for my 60 frontend. 300m.
Fnord5, don't forget I have that new cable I gave you sitting here for your winch.
It was the little cable that goes from the shifter to the key to tell it is in park. Friggin plastic shit clip.
Ordered RCV's for my 60 frontend. 300m.
Fnord5, don't forget I have that new cable I gave you sitting here for your winch.
Joined
·
1,338 Posts
I got a couple different tires lying around call me
Sent from my SPH-D710 using Tapatalk 2
Joined
·
1,890 Posts
Sell your gun and buy my rubi take-offs. they have < 1k miles on them.
1,701 - 1,720 of 4,188 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
