[gmanmp]

Added this paint on tape to my wiring harnesses under the seats. Also mounted the SB winch and lastly, mounted the bestow lock box under the driver's seat.

Not sure what happened to my pics.
I have added three photos to prior post in this thread and now exceeded my maximum. Guess i can't post anymore pics....wow!

 

[j3ff3ry_j33p]

Not sure what happened to my pics.
I have added three photos to prior post in this thread and now exceeded my maximum. Guess i can't post anymore pics....wow!

Photbucket, Flickr or Imgur to web host upload your images to , select the image attachment then paste the URL for the direct image link /address so you're not exceeding the max storage allowed by this forum ....

 

[Thantos]

You can host them offsite (imgur, ect) and still post them with this img tag.

Or when your post count goes up, that limit goes way up

 

[badtux]

Added a gas can holder to my spare tire mount (note -- I have the Teraflex tire swing, do *not* try this with the stock spare tire mount!):

 

[Marcy]

My Jeep was stock a couple weeks ago but my husband spent all his free time in the garage installing a lift, bumpers, crusher corners, fenders, sliders, half doors, wheels, tires and a winch so we could take it to Jeepers Jamboree on the Rubicon this last weekend. We were cutting it close since the lift didn't arrive until 7/22 and we left early on 7/27 but we made it :roxy:

 

[Uncle Sams Misguided Child]

Relocated CB from above the sound bar to the top of the dash. What a clusterfuck.

 

[Casca]

Installed these custom color knuckles to 4dr jk. Also ordered mirrors from Carolina metsl masters to boot.

 

[badtux]

Added the M.O.R.E. oil pan / transmission skid. One solid piece of plate from front of engine all the way back to the crossmember. This is from immediately before I put the last two bolts at the crossmember end...

 

[spinuck]

I did the MORE skid too along with the PSC crossmember:

 

[badtux]

I did the MORE skid too along with the PSC crossmember:

My crossmember's still in good shape so I didn't touch it. I like the little ramp thingies you have to protect your bolt heads. Do you have a source for those?

 

[spinuck]

They come with the RockHard engine skid. I had to change because the RH one hit my front diff.

edit: http://www.rockhard4x4.com/product_p/rh-6000-sw-496.htm

Not sure if there's another cheaper source for them.

 

[badtux]

They come with the RockHard engine skid. I had to change because the RH one hit my front diff.

edit: Rock Hard 4x4 "Rock Dome" Tapered Bolt Head Protector for Skid Plate Systems - Large [RH-6000-SW-496]

Not sure if there's another cheaper source for them.

Thanks! I did a Google and Rockhard was the only place I found for anything like that, so (shrug). There you are.

 

[spinuck]

Lifted it:

 

[Asinine]

I turned off the Christmas tree that was my dash - replaced an O2 sensor and ABS sensor. Nice to not get blinded by warning lights at night.

 

[1Tontractor]

Went wheeling at hollister and put the soft top on I picked up a few weeks ago

Sent from my SM-N910V using Tapatalk

 

[badtux]

Took the angle grinder to the corner of the M.O.R.E engine/transmission skid that I added a couple of weeks ago because it was lightly contacting the exhaust at full throttle, causing an annoying buzzing sound.

Put on a fresh radiator cap. Drained the coolant in the radiator and overflow bottle, refilled with fresh coolant/distilled water 50-50. Yeah, I know, that's only 1/3rd of the coolant in the whole system, I'm going to start doing this on a regular basis until it's all lime green (the native color of G-05 coolant) rather than pink.

 

[j3ff3ry_j33p]

promised the wife that I'd sell the FreedomTop and panels (that I haven't used for 2 years )so the money I sent Marcus @RiverCityOffroad for these would be replaced. Installed new shafts on Saturday along w/ a testing of Currie Enterprises TRE dust boot to see how the old Synergy DL flop might be mitigated a bit. You can see it on the knuckle TRE of DL . So far it is controlling the droop but able to flex as necessary.

:jeep2:

 

[jvandy50]

Went wheeling at hollister and put the soft top on I picked up a few weeks ago

Sent from my SM-N910V using Tapatalk

what tire are you running? looks great

 

[j3ff3ry_j33p]

those look like 37" ridge grapplers from Nitto to me, @jvandy50

I thought they looked cool w/ the OEM wheels ,also so had searched to see what they were... :jeep2:

 

[1Tontractor]

Yep, nitto ridge grapplers in a 37. They work well offroad and they drive like an A/T on the road.

Sent from my SM-N910V using Tapatalk