JKOwners Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
314 Posts
If the factory harness does not supply enough power to power the lights then wire in a relay. It will use the signal from the fog light switch but run a seperate wire to power the lights themselves. Should be able to pick up a relay at any autoparts store. 20A should be enough. Don't forget about the inline fuse on the wire coming directly from the battery.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top