Replaced ring and pinyon

 

Installed my RROR evap skid plate,
Installed my Rock Hard oil pan / auto trans pan skid plate,
Replaced all control arm and track bar hardware with 9/16 grade 8,
greased everything since I was under there.

 

Jim & I sawz-alled my exhaust bolts, and replaced them, pulled the armor underneath, changed the ATF & Filter, and Oil & Filter (Mobil 1 of course), and I'm proud to say that no polishing or frame shining occurred.

Transfer case fluid change, and air system modifications scheduled for Jeep Night...

RC

 

so i was trying to post the actual voicemail but i was able to send the text version to myself via email so here is what the dealer left on my voicemail....

"Spencer this is Jason calling from normandy chrysler jeep wanted to give you a call and let you know we got your wrangler checked out ... it does in fact need to have your catalytic converters replaced ... but in order to do that you're gonna have to get the actually there's a couple of supports that are gonna need to be replaced because they are smashed need a transmission Cross support with the transmission mount ... transfer case shield Cross support is gonna need to be replaced as well ... but to do all of that including replacement catalytic converter and all the Bolts and what not you're look at almost 3000 dollars to do this ... parts alone or just over 2000 bucks so anyway ... and it does need to be ordered it'll take 3 to 5 days get all the parts here so if you could give me a call back let me know ... what you'd like us to do with anything my direct number here is (xxx) xxx-xxxx thank."


dont worry i will keep you guys updated lol also anybody have a y pipe laying around let me know:th_pray:

 

2012 Prediction: Spencer will have to go on a Chippendale Tour expedition to generate enough "scrilla" to fix his rig before the 2013 Jeep Outings.

We all appreciate Spencer, so I say we should all chip in for his "pastie fund".

RC

 

pshh pasties are for shy people

 

Time to just burn the jeep spence.

 

One "LAST" Rubicon run buddy!!!

 

Over 900 for the cats but the deler did say my Jeep is badass lol.

Sent from my SPH-D710 using Tapatalk

 

I'd look for a pick n pull with a wrecked one n go grab your parts n put her back together

 

Spence,
Im sure RC or Jim should be able to hook you up with some pasties if you need them. And I seriously think its time to put the Jeep down like an old horse

 

WOW back up the horsy. How did I get thrown under the old pasties bus Pasties for men is not in my department. Now if you need pasties and tassels for women then we are talking

 

I'd love to see the look on the tech's face when he put that thing on the lift.

 

He was like "what the ****!"

 

Jeep is home just spent mosty night removing the ******* y pipe those bolts suck big time! Might have to replace my skids while im at it anybody got there stock ones lying around?

Sent from my SPH-D710 using Tapatalk

 

Jeep is home just spent mosty night removing the ******* y pipe those bolts suck big time! Might have to replace my skids while im at it anybody got there stock ones lying around?

Spence, I have transmission skid...

 

My Steering Stabilizer just showed up and I just got done putting it on. I think that is the last piece I broke on the late December Rubicon day trip/finding lost Jeepers trip!!!

 

Time to get the water out of your tires Or keep using it as a balancer ha

 

Spray tinted my marker lights. Looks so much better with the fenders and bed lined grill.

 

IT LIVES!!!!!!!!

drove it to work and its just y pipe at the moment had to use a sawzall to get that bitch off so now i need to weld up the rest of the exhaust.


im so used to driving my work car that i forgot what it was like to drive the jeep... felt like it was trying to kill me then again it has been 2 months it might be angry...

 

drove it to work and its just y pipe at the moment had to use a sawzall to get that bitch off so now i need to weld up the rest of the exhaust.


im so used to driving my work car that i forgot what it was like to drive the jeep... felt like it was trying to kill me then again it has been 2 months it might be angry...

I think your Jeep might be trying to kill you cause you keep trying to kill it!!!

 

Yeah.... Thinks thats the problem?
Sent from my SPH-D710 using Tapatalk

 

My camaro blew all that out once
Damn cats are crap see if u can go with a highflow

 

I wonder when that cat is 1000 degrees and take a dip in a water hole if it may cause that degradation, hmmmm.

 

Put on VisionX rock lights and now I am ready for those night runs I seem to end up on...

 

Ordered a smart door kit from Woods. Pretty interest in how that's going to work out!

 

I cut out some brackets to mount lights to the windshield pillar. I cut a bracket to relocate the vacuum pump to the engine compartment, and re-routed the wires/hoses. Then spent the better part of two days installing my winch behind the factory bumper. To finish it all off, I made a plate to attach the license plate to the fairlead with mag lite clips.

 

in the last week:

bought it, installed diff guard saved from my XJ, loaded all recovery gear into it, got a Procal, mounted mag light to seat frame, and deleted third brake light.

 

oops, wrong place,

 

37" BFG Krawlers and WE Beadlocks just arrived this afternoon on my front doorstep!

 

That's one hell of an upgrade.

 

All I did was wash the jeep this week but the garage got an overhaul. Coated the floor, painted the walls a few finishing touches this week but a much better space to park the jeep.

 

that garage looks nice...is that a GTR parked in it too??

 

2 Tires Mounted

Two to go (I'll do the spare later). Taking about an hour a tire - lazy ass that I am... :gluging:

 

Two to go (I'll do the spare later). Taking about an hour a tire - lazy ass that I am... :gluging:

Love those WE with those shoes. Good combo.

Rama, garage looks good. Which flooring did you choose>?

 

WE's are so nice and then theres the D60. very nice!