Looks great! Especially the beer.........................

 

Installed me wench! I mean my Warn Endurance 12.0

 

spec stage 2+ installed today. bering fried, came out in a thousand pieces. rear seal gone as well.

now for the 500 mile break-in.

sent from fat fingers, tiny virtual keys.

 

Installed Smittybuilt Neoprene seat covers. Bought VisionX Tantrums from a JKO user and should be receiving them today via UPS. Ordered a PSC evap skid and shuold hopefully get it by Friday so I can install and wheel the shit outta' my rig Saturday! :bounce:

Also discovered that I didn't have my TrekTop secured on the door surrounds properly. All fixed now, though.

 

In December I was given a ticket for a "potential future pebble projectile violation", which is otherwise known as CA State Code 27600, and states that you must have mudflaps covering large tires.

Four months and five trips to the courthouse, one set of removable mudflaps, and one friend-of-a-friend officer's signature later, and I'm good to go.

All done!

RC

 

Gave 'er a nice bath. All clean....until tomorrow

 

Installed a factory radio with Sirius that I bought here on JKO for $75.00, that doesn't work. issed:

I still don't have a MyGig, and when I downgraded my desires to just Sirius, I can't even have that.

RC

 

Actually over the last 4 months or so, but here it is, and I'm sure I missed a few things. I would post pics but I suck at it........


HD Customs License Plate Relocation Bracket
Modified Jeep Rear Tire Carrier (shortened)
Smittybilt Front Winch Bumper
Smittybilt XRC10 winch (synthetic cable)
BF Goodrich KM2’s 35/12.5/17
RIGID Dually Flood – pair on bumper
RIGID Dually Driving – pair on windshield
sPOD
ARB onboard compressor w/ air up hose kit
Wrangler Tube doors
COP4X4 Nack Attack
COP4X4 carbon fiber A-pillar gauge pod
PSC Hydraulic Ram Assist Steering
L.E.D. Rock lights
Rock Krawler HD tie rod
TeraFlex HD Track Bar
TeraFlex High Steer Drag Link
TeraFlex 3” Full Control Arm suspension
Hand Grenade shifter’s
Neoprene Seat covers (Hawaiian Seat Cover)
Stainless Steel grill insert
Front and Rear overhead grab handles
Spray in Bed liner (carpet removed)
Cobra CB
Daystar Hood latches
Custom Trimmed fenders
60” High-Lift Jack
Riddler Diff covers
Crown extended brake lines (all 4)

 

Finished running my air lines from ARB to air tank and ordered my new Superwinch!

 

lifted last week and tires on this week.

doesnt look like a rollerskate anymore :bounce:

also painted the stock wheels

 

Looks good. I see you're rolling with Venom.

 

Sometimes I forget this thread isn't just NorCal anymore.

 

Swapped a "new" engine in!

 

I did

Seats/Harness,

and this many helpers

 

Installed my PSC evap skid Friday evening and then wheeled the shit out of my rig Saturday.

 

Built shelving in between the joists of my pathetically low (and incredibly packed), flattop garage to store, my trail doors, softop, etc...

 

Does that mean your hosting Jeep night this week? Did you get the tie rod on yet? I could use a or tonight!! Anyone want to meetup?

 

Tramp stamp

Painted the grill and moved the license plate.

 

Painted the grill and moved the license plate.

I like it.....the painted grill is really growing on me!! I might have to do that Mod

 

Black grill on silver is sick

 

Installed Synergy Ball Joints. Ball joints are leaps and bounds better than factory. I was waitng for the HF balljoint press to grenade, but it held up. I don't know how much more it will take though. My breaker bar and floor jack handle extension were flexing hard too. Balljoint replacement took 90% of my DW away. Replaced my Rubicon Express trackbar with Synergy adj front trackbar and trackbar brace. The Rubicon Express trackbar is designed to be used with REs frame side drop down bracket and is too wide to be used in the stock location. REs trackbar is strong but Poly's appears to be built stronger.

Next phase:

Address bad control arms and bushings

Address bumpstops and steering stops.

Replace REs draglink with Synergy draglink.

Gotta get that RE taste out of my mouth.

 

Gotta get that RE taste out of my mouth.

RE.....Rick Easy?? I wouldn't want that taste in my mouth either!!

Where is RICK NASTY?? I seen his lady yesterday....she was ROCKIN a FULL BEARD!! I'm not kidding!! I seen some woman with a full beard....minimum 3/4" long!! It was crazy!!

 

Damnit, I can't say anything on the interwebs

 

I'm tossing the idea around of installing my VisionX Tantrum LED Rocklights tomorrow, making some mods to my OBA system, etc., tomorrow at my place in Turlock.

If I do, anyone is welcome to stop by for a Stella, Hefeweizen, or Bud Light, if you're in the area. The fridge is always stocked with liquids.

RC

 

a huge thanks to Chris (FastTrack) and his father in law Pat. Ive had the idea for a while to hack up my rancho stubby front bumper and mount a recessed winch. I'm lacking in the fabrication skills department, but Pat made my idea a reality. He finished it up yesterday and we got some paint on it and mounted it all up. its working perfect and I couldn't be happier with how it turned out. I decided to be different and paint the bumper in a dark green, kinda old school jeep style. well I painted the fairlead, d rings and bolt heads all black. I really like how it turned out. I decided to also paint the rubi sliders to match, same green on the body, and flat black painted the end caps. I may paint up the rear bumper to match too, I just have make sure I still like the color before going through all that. here it is:

 

12" LED LIGHT BAR installed:bounce:

YouTube - 12" LED Light Bar

a to who can guess what song the music to the video is from

 

What light is that ?? Xmitter ?
Thinking of doing something a little similar , I want to mount mine not on the stinger but at the top of the fairlead. Just haven't dropped money into lighting yet.

 

ok this week I put on a new front winch bumper from Shaffer's Offroad. awesome bumper, and you can NOT beat their price $199 with the stinger.
also installed a rear tire carrier bumper. (thank you sfccotton). then for the grand daddy i installed some new rear coilovers, and HOLY shit my 37s look small now, so I am jumping up to either 39.5 or 41" IROKS, oh yeah Jeep goes in the shop next week to have ford 9" axles installed front and rear will be running 513 gears with detroits front and rear. check out the pics

 

ok this week I put on a new front winch bumper from Shaffer's Offroad. awesome bumper, and you can NOT beat their price $199 with the stinger.
also installed a rear tire carrier bumper. (thank you sfccotton). then for the grand daddy i installed some new rear coilovers, and HOLY shit my 37s look small now, so I am jumping up to either 39.5 or 41" IROKS, oh yeah Jeep goes in the shop next week to have ford 9" axles installed front and rear will be running 513 gears with detroits front and rear. check out the pics

Wow, Go big or go home. Nice going building that beast.
No kidding about the price on that bumper. I saw that on Shaffers site and almost called thinking it was a misprint. Great deal on that.