JKOwners Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
539 Posts
Discussion Starter · #1 ·
Let there be light.



After waiting a few weeks for my light to be built it finally showed up yesterday, now I just need to mount it. I have two choices to pick between. I can mount it on the taller brackets that it came with, and it will leave just a few mm for adjustment between my light mounting tabs and the light.



The other option is to cut the light mount tabs off, and ust the normal brackets, and it will clear the top of the bumper by just a few mm.
 

·
Registered
Joined
·
3,175 Posts
Looks suck. Never heard of that brand before.
 

·
Registered
Joined
·
909 Posts
I like it. It's good to be different.

From the pic it's hard to tell if you're showing it with the tabs in place. Is it resting on your winch?
 

·
Registered
Joined
·
539 Posts
Discussion Starter · #5 ·
I like it. It's good to be different.

From the pic it's hard to tell if you're showing it with the tabs in place. Is it resting on your winch?
In the picture it is pretty much sitting on my light tabs, about where it will be if I use the longer brackets that came with the light.

If I cut the tabs off I can use the smaller tabs, and drop the light down about 3/4"
 

·
Official Monkey Business
Joined
·
12,215 Posts
Looks sharp. Try to get us a pic of the light it belts out.
 

·
Registered
Joined
·
539 Posts
Discussion Starter · #8 · (Edited)
Very nice. Best led bars out there, IMO. Is that a 20"?
*edit-never mind, 20 leds=20" bar....duh.
I am just waiting to see what can be done with the Squadron LED lights for the bumper that you guys were working on, and I am hoping to see someone come up with a light bar for over the windshield with Baja Designs 50" bars. They have great products, but just aren't nearly as popular with the Jeep world as Rigid or Vision-X for some reason.

Looks sharp. Try to get us a pic of the light it belts out.
I will do that. It might be a few weeks though because I want to wait until I have the momentary switch added in to be able to demonstrate the high/low/strobe modes.
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top