JKOwners Forum banner

Transmission and X-fer Case Breathers

1332 Views 1 Reply 1 Participant Last post by  gcg
I'm working on extending all of my breather elements. The axils where finished no problem. However I can't find the breather for either the Transmission (6 speed) or my transfer case. In some older post it was theorized they already run into the engine bay. I can't find any confirmation on this.

Anyone know where I can find them?

Thanks,
Jason
1 - 2 of 2 Posts
G
I am in the same boat as you are. I did both axles and then started looking for the transmission and transfer case breathers - no luck. I checked out the factory service manual and couldn't find anything there, either (though they do indicate the presence of them, they don't show the location). I posted here a while back but didn't get a response.

If you do find them, please post back as I think it would be good information for all of us.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top