[mechano]

Hello, I am currently in the market to buy one of those rear tail gate center covers(link attached at bottom. I am aware of the poison spyder, warrior product and Vector system, but really would like to see if any other options are out there that I may be missing upon internet search/google.
1) http://www.vectoroffroad.com/product_info.php?products_id=42{3}20
2) http://www.northridge4x4.ca/proddetail.php?prod=PS-18-04-011
3) http://www.quadratec.com/products/12517_443X_PG.htm#

these 3 are what I have found only. I would prefer if the plate would bolt DIRECTLY to the factory bolt threads rather than by way of "RIVETS or ADHESIVES" if anyone might know of an alternative it would be greatly appreciated!!! thanks

 

[StepsRide]

http://desertsnakeoffroad.com.strawberry.arvixe.com/default.aspx


These guys are good folks and can do anything you want if you provide a picture or they have some standard designs that they do.

 

[Woody89]

Hello, I am currently in the market to buy one of those rear tail gate center covers(link attached at bottom. I am aware of the poison spyder, warrior product and Vector system, but really would like to see if any other options are out there that I may be missing upon internet search/google.
1) http://www.vectoroffroad.com/product_info.php?products_id=42{3}20
2) http://www.northridge4x4.ca/proddetail.php?prod=PS-18-04-011
3) http://www.quadratec.com/products/12517_443X_PG.htm#

these 3 are what I have found only. I would prefer if the plate would bolt DIRECTLY to the factory bolt threads rather than by way of "RIVETS or ADHESIVES" if anyone might know of an alternative it would be greatly appreciated!!! thanks

Try swag off road.

 

[snksknr94]

Rancho makes one in their rock gear line. I haven't found it available anywhere yet but its on rancho's site.
www.gorancho.com

 

[R0ck]

FWIW I started with the Poison Spyder Tramp Stamp and switched to the Vector Element Plate. PSC logo was cool on the tailgate, but the Vector unit won with stock mounting AND keeping my A/C happy by allowing better air flow through the tailgate baffle.

 

[Loki646]

Going with a custom Orfab one, I should have pics of it this weekend when I go pick it up....

 

[mechano]

vector

Decided on the Vector system.
http://www.vectoroffroad.com/

 

[Vector OffRoad]

FWIW I started with the Poison Spyder Tramp Stamp and switched to the Vector Element Plate. PSC logo was cool on the tailgate, but the Vector unit won with stock mounting AND keeping my A/C happy by allowing better air flow through the tailgate baffle.

Thanks for the positive review R0ck!

Decided on the Vector system.
http://www.vectoroffroad.com/

Thanks for the order!!!

 

[ScaleJK4x4]

Check out Desert Snake. Here is a thread on their plates. http://www.jkowners.com/forum/showthread.php?t=48738

Good stuff! Support your JKO vendors!

 

[10jk]

How about doin this

 

[gfe jeep]

inexpensive

Rustys has an inexpensive one

 

[mechano]

How about doin this

not a good idea especially up here in the winter as that almost cuts off your body ventilation. So u use your heat in minus 15-20 celsius and theres a good chance when you close your door that glass "could" break due to no ventilation(that is extreme tho) If I lived somewhere that was dry and more warm all year around I would do that because my top would always be off!

 

[Grim jeeper]

look at desertsnake see my profile picture the did this custom piece for me took less than a week from oder to my door and the custom cut it for me

http://desertsnakeoffroad.com.strawberry.arvixe.com/default.aspx


These guys are good folks and can do anything you want if you provide a picture or they have some standard designs that they do.