JKOwners Forum banner
1 - 20 of 20 Posts

· Registered
Joined
·
342 Posts
Discussion Starter · #1 ·
Hey everyone I'm in the process of my build and ill be ordering an spod soon aswell as new lights and a compressor for a rear locker... I was wondering if there are any other mounting options of the spod.. I know most put them up top but i have my oh shit meter there and dont want to relocate it. Any suggestions or photos of what some of you have drone..
Thanks!


Sent from AutoGuide.com Free App
 

· Registered
Joined
·
1,827 Posts
Hey everyone I'm in the process of my build and ill be ordering an spod soon aswell as new lights and a compressor for a rear locker... I was wondering if there are any other mounting options of the spod.. I know most put them up top but i have my oh shit meter there and dont want to relocate it. Any suggestions or photos of what some of you have drone..
Thanks!


Sent from AutoGuide.com Free App
The piece is designed and built to fit above the mirror. I don't think the case from spod will work right anywhere else. I think Rebel Offroad mounted all the spod parts under the steering column for a "2 spod build".
 

· Registered
Joined
·
822 Posts
you could probably mount it to the soundbar, on the dash (it looks to be wider than the recessed area in the middle of the dash though). The issue w/ mounting it anywhere other than on the dash / in the suggested location is that the wiring harness it comes with woudlnt' be long enough to reach anywhere else, so you'd have to cut into all of the wires to extend them.

I love my sPod but I'm going to be installing one of the Bussman relay/fuse panels next (not sure where I'll mount the switches). Should save a lot of money going that route.

http://www.jkowners.com/forum/showthread.php?t=57077
 

· Registered
Joined
·
1,827 Posts
you could probably mount it to the soundbar, on the dash (it looks to be wider than the recessed area in the middle of the dash though). The issue w/ mounting it anywhere other than on the dash / in the suggested location is that the wiring harness it comes with woudlnt' be long enough to reach anywhere else, so you'd have to cut into all of the wires to extend them.

I love my sPod but I'm going to be installing one of the Bussman relay/fuse panels next (not sure where I'll mount the switches). Should save a lot of money going that route.

http://www.jkowners.com/forum/showthread.php?t=57077
They're not the same thing so I'm not sure making a cost comparison is fair.
 

· Registered
Joined
·
342 Posts
Discussion Starter · #14 ·
Making a custom mount or putting the sPod in a different location should not be to hard. Yes you may have to extend the wires but you should be able to make a switch panel in a few different spots!

-Jason
Yeah Jason deff going to be making a custom dash mount ill be sure to shoot over the final details and out come to you guys!


Sent from AutoGuide.com Free App
 

· Registered
Joined
·
2,353 Posts
I was talking with sPOD last night and they mentioned something that they are working on that is universal fit. You should give them a ring and ask for Cinde. Tell her I told you to call.

Marcus
I relocated my vacuum pump to under the hood where spod mounts unit under the hood. What are the other options for under the hood?
 

· Registered
Joined
·
1,134 Posts
1 - 20 of 20 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top