JKOwners Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2,721 Posts
Discussion Starter #1
Like it says, I bought two to try and fit them in my shrockworks rear bumper, needed four but I wanted to make sure before I spent another 200 + on them. Well they didn't fit so I need some ideas, I have the hella black magics on the windshield brackets so that spot is taken, the solo's that I have are the elliptical version so that kinda limits how I can mount them as well. The lenses are also glued in so I can't swap them out. If they were the flood pattern I could have put one in the engine compartment on a mercury tilt switch or something along those lines, I have been thinking of munting them on the frame rails and having them come on and lite up the side of the jeep that the door opens on since it is the elliptical pattern but other than this i'm stumped so I thought that i'd ask.
 

·
Registered
Joined
·
2,286 Posts
Are you talking about the Vision X Solo's? I have some for my back up lights... 3 floods... I also replace my fog's with the elliptical pattern 15/45 beam. Need pics...Just let me know.
 

·
Registered
Joined
·
116 Posts
Here is how I have mine mounted









I just bent a pice of metal to form a 90 and tapped the grill crossmember and bolted the plate up
 

·
Registered
Joined
·
2,721 Posts
Discussion Starter #4
Hmmmnnn. I thought of that as well but wasn't sure how it would turn out. I'm now pretty close to falling over the edge and putting the Shrockworks set up in the for sale section. So who knows what I'll end up doing with these things. But the grille is so for the most feasible.
 
1 - 4 of 4 Posts
Top