JKOwners Forum banner

Slippery ll - "TOXIC" JK Unlimited Rubicon Build

20827 Views 70 Replies 21 Participants Last post by  Acerwin
4
Starting my 2nd JK build. It won't be as big or bad as Slippery l, but I think we'll enjoy it just the same or more, and use it a lot more as well.

Lower so the wife and kids can get in and out easier, and smaller tires so we can drive it anywhere more comfortably.

Planning to do as much as possible in the garage. I'm just getting started with the
ROCK KRAWLER JK 3.5" X FACTOR SYSTEM w/ 2.5" SPRINGS

Then I'll add some products from MISCH4X4, some POISON SPYDER bumpers and Armor, and some RACELINE WHEELS. Then we'll see what's next.

:thankyou:

New Jeep:





Never on a rock:



So I have my Rock Krawler instructions out, Jeep on stands, and I'm ready to start.

See less See more
1 - 7 of 71 Posts
Well, I don't like dirty axles, so out they came...



All pretty now.

You got me...I thought I was going to see 60's in the 2nd pic
Not sure on the tires yet. Lack of availability in BFG-KM2's and GY-MTR's leave one to ponder. :gluging:

Might wait on MTR's, looking at the Toyo...

Not sure 35's or 37's due to the driveability being VERY important.
Wait on the MTR's and go 37. If you hate them I'll swap you my 35's and few bucks.

There, that was easy :koolaid:
All I have to judge it against is the 40's I was running on Slippery 1.
How were the 40's on the street? I've never driven one with that size tire.
Are you going to have this thing put back together for Morris Mountain next weekend?:gluging:
MT/R's mounted up?

Time's running out and those PS flares don't mount themselves!!!!
Sounds awesome. Could you tell me the height from the ground to bottom of the driver's door sill? I'm debating getting a side step depending on the height and I'm looking at this same suspension/tire setup
He is on his way to EJS, I'm sure he'll hook you up when he can.
1 - 7 of 71 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top