JKOwners Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
158 Posts
just in case the instructions don't mention: lower or remove the tranny skid to make room for your front drive shaft to drop down enough to pull the driver side spring. that's the only thing that i got hung up on and over looked when installing my lift. you might even want to groove out a section in your skid for drive shaft clearance at full flex. shouldn't need much.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top