[md_rubi]

I'm going to do this mod next week. Picked up the calipers for the front and the rear today.

 

[md_rubi]

GKR, i did this mod and it worked great!

Stopping is greatly improved but the peddle feel is the same. I am going to upgrade the master cylinder and see if this help. I am also going to see how much it would cost to get the bracket and the spacer machined if anyone is interested.

 

[md_rubi]

i got 10 sets made. let me know if any of you guys want a set. I only have the brackets, spacers, and the new grade8 bolts. you'll need to get your own calipers and pads. BTW. NAPA told my factory JK calipers and credited me $90!

 

[md_rubi]

i want to put ram calipers front and rear
someone make a bracket kit

i looked at the rear but it would be lot easier to get an entire new set of calipers and ebrake. also not all ram1500s have dual piston calipers.

 

[md_rubi]

i want to put ram calipers front and rear
someone make a bracket kit

I have been looking for some type of upgrade like this for a while. I am running a dana 60 up front from an f-350 superduty but the knuckles are the same as the RJ. I have been using Currie's adapter bracket and caliper set but want a dual piston set. The Terraflex Big Brake kit does not fit well. The rotors would have to be turned out for the larger unit bearing and the rotors have a different height then the Currie rotors that already fit well. The calipers of the Terra flex kit look similar to the 1500's but the mounting area is recessed for the bolt up to the stock D44 knuckles.

Anyway, how much for a set of your brackets, bolting, and such?

the mountng point to the axles should work since they are mated to the cureie axles. what size rotors do you have? these brackets are designed to work with the 13.5" rotors from currie and the ram1500 calipers.

 

[md_rubi]

I have 10 sets left. I am not looking to make any money but i would like to break even on these. the raw materals i purchased alloed for 10 sets and thought other jeeps would like this mod. email me at [email protected]. I don't always check the forums these days.

thanks