JKOwners Forum banner
61 - 72 of 72 Posts
Discussion starter · #64 ·
So which catorgy does the 2wd jeeps go
The Liberty, Patriot Ride of the Month thread... :thefinger::laughing:
^^^This! :laughing2:


JK....it would go under the stock category if you haven't done anything to it! :D


REMEMBER: This evening at 2400/midnight JKO posting timestamp is the last of the entries. All categories will be built separately for voting! Good luck! :beer:
 
RobRut's Submission

Here's my stock 2011 JK. I added the Smittybilt step bar, and the Hella's but everything else is stock.

Last Pic is me guiding KobeCrozJK through the mud. He finally got his Rubicon JK a few weeks ago.

I still got Donuts for shoes but that's not stopping me from getting dirty!!!





 
Image


figured id give this a shot. bonus points for being 20 and doing every bit of work myself while in the military?

2010 jk sport auto
aev 3.5 premium lift
aev high steer kit with bilstein stabilizer
bilstein 5100s
crown front and rear extended brake lines
jks quick disconnects
evo c gussets and sleeves for front dana 30
yukon 5.13s
aussie rear locker
superior chromoly shafts front and rear
raceline wheels
nitto mud grapplers 37x12.50x17
orf rear bumper and tire carrier
smittybuilt xrc flat fenders
smittybuilt xhd front bumper
vipermax 12000lb winch
H.I.D. light conversion for headlights and h3 bulbs in the fog lights (35w each)
rock rails (dont remember the brand)
superchip flashpaq tuner
volant cold air intake
high flow 3" exhaust with flowmaster 44 series
1000w amp and jl w3
slush mats
rugged ridge grab handles front and rear
15% tint all the way around
poison spider evap skid

other than the tint i did about 99% of this work byself including the welding and and gear installs ect. all weekend work in my freetime. worth a shot i guess
 

Attachments

Discussion starter · #69 ·
Getting down to the wire....15 minutes left for entries!! Any last entries for all 3 classes?

Looks like the stock class is a little light on submissions...but that is good for those who entered! :D

Remember, since I am running this thing, I will not be entering the competition and I will also not be voting......Good luck everyone! :beer:
 
Discussion starter · #71 ·
And submissions are over.....voting threads are under General discussion and will be updated as of right now with all the rigs that entered! :D

Thank you everyone who submitted your rigs and GOOD LUCK! :beer:
 
Discussion starter · #72 ·
OK, so i got some booze in me after a long week of BS at the office and I am ready to vent. First off, I want to say thanks to JKO for allowing me to leech ideas without providing much input for others. I apologize, but I just don't have the time because I am in the military and despite not being deployed presently, I have a slave driver of a boss who is only concerned about his own promotion, so it is all work and no play for Stacman. I also want to thank TXROCK for watching my back for steals and deals on parts; thanks bro, you are a scholar and a gentleman. Lastly, I want to thank all those Jeepers who have provided me with ideas for my build; without you I would be stock. While I do not yet consider my Jeep a "Rig," I do aspire to greatness someday when I can get a freaking break from the man and do some real mod'ing. So enough of the rant, here's my rig shite:

1) 2008 JK Rubicon Unlimited (Bought it in 2008 w/ a salvage title for $14,500 from Daveysjeeps.com)
2) Home-job stubby bumper and grill thanks to JKO ideas, Craigslist, and Rustoleum
3) Kargo Master Congo Cage and Safari Rack
4) Thule Kayak mount ('cause I like that shite)
5) Drake Billet Grill Inserts
6) Airaid CAI
7) Custom Spare Tire cover (My own copyrighted design btw-yeah I did the right thing)
8) Rubicon Express 2-inch Budget Boost with new Rubicon Performance shocks (Thanks for the help TXROCK)
9) Rugged Ridge Locking Fuel Hatch Cover (in the garage awaiting install)
10) Adjustable Front Lower Ball Joints ('cause if have the fortunate misfortune of being stationed in Hawaii (Oahu only), you have to get an additional inspection on a lifted Jeep called a “Recon,” which requires factory spec alignment, which if you have been off road a few times or have been in a fender bender, can't be accomplished without adj. ball joints (In garage awaiting TXROCK assistance).
11) POR 15 Chassis Coat (Also in garage awaiting time from the man)
12) Smittybuilt Neoprene seat covers all around
13) 4WD Slush mats all around
14) Daystar JK dash tray
15) Mastercraft Grab handles ('cause the wife was bitchin)
16) VDP Trash-N-Cup Combo insert ('Cause the kid was messin’)
17) XM with Infinity Surround and Sub-woofer
18) Those damn window thingy’s that keep the rain out (Does that count?)
19) Spidertrax Wheel Spacers
20) Yeah I don’t even have 20 mods so the prizes should be reversed; least mods get the most cash ‘cause it is obvious that we need it the most.

Just ordered front greasable axle tube seals from 4WP (‘cause I’ll have access during the ball joint swap and one is leaking anyway).

Thanks again JKO and TXROCK

Stacman7

You're Welcome and Thanks as well Stacman7! :beer:
 
61 - 72 of 72 Posts