JKOwners Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
244 Posts
Discussion Starter · #1 ·
They directly bolt to the rear frame rails of my '07 JK.

Donor truck


Step 1. Remove rear bumper, you don't need that anyway.

Step 2. Bolt on.

Step 3. Admire work. :beer::beer::beer:





Note that brownish stuff on the frame is mud, while the brownish stuff on the hooks is surface rust. They'll be taken off, cleaned up, and rattle canned, probably.
 

·
Registered
Joined
·
244 Posts
Discussion Starter · #3 ·
Probably. There wasn't a lot more metal there on the Chevy though. It's been pulled hard a couple of times. It doesn't have nuts on the back, it has a backing plate, so that should help some.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top