JKOwners Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
95 Posts
Discussion Starter #1
Can someone who has their rear bumper removed please give me the measurements of the frame openings as well as the distance apart. Its time for me to start designing my new rear bumper.
 

·
Mechanic
Joined
·
1,068 Posts
use your own frame for measurements. Different years of jeeps have different measurements due to mushroomed frame ends. I had to have a bumper sent back due to the fact that the jig was made off a 2007/8 jeep and mine is a 2011. wouldnt even slide on.
 

·
Registered
Joined
·
899 Posts
use your own frame for measurements. Different years of jeeps have different measurements due to mushroomed frame ends. I had to have a bumper sent back due to the fact that the jig was made off a 2007/8 jeep and mine is a 2011. wouldnt even slide on.
I agree. Remove your bumper and take measurements.

They will be 100% accurate and you will also have first hand knowledge of how the bumper should be mounted.


.
 
1 - 4 of 4 Posts
Top