JKOwners Forum banner

1 - 3 of 3 Posts

·
Vendor
Joined
·
2,503 Posts
Discussion Starter #1
So I'll try to do a write up on some rear control arm skids for the jeep. I have already bent one of the flanges out pretty bad and had to hammer it back in. Anyways I did some quick modeling to get an idea of what I was going to do. Basically my plan is to weld the pieces together in red then weld the part to the stock control arm mount along the front and back edges and then some gussets to it and tie it into the axle. I'll post up more once I get to cutting some metal. Feel free to provide opinions!
 

Attachments

·
Gunnery Sergeant USMC (ret)
Joined
·
22,098 Posts
Maybe we should go into a business relationship and start making those.
 
1 - 3 of 3 Posts
Top