JKOwners Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
139 Posts
ATX must have really dropped the ball I have a buddy with the same problem. He called them yesterday and they sent the inserts out rite away. We are going to start on them Friday. I have the same wheels but all the inserts were installed already.
 

·
Registered
Joined
·
139 Posts
We used a bolt with a lock nut threaded on to it. We threaded the bolt into the insert until it was against the jam nut. Then you can turn the insert in with a ratchet and the lock nut will keep the insert from going to deep. we had them all installed pretty quick. If you have any questions just send me a message.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top