JKOwners Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
New here, hi folks!

When I got my 2016 jku (stock) a few months back and went for an alignment they had to install a camber shim in the front driver side and all was good.

Fast forward 2 months I decided to add 2.5” spring lift, 35x12.5x17 nitto trail grapplers, and front lower adjustable control arms to correct caster.

Now my front left camber is out of spec. They recommend adjustable ball joints. sigh wishing shims were stackable lol :/

Below are my alignment specs. Why would it be pulling left?? I thought it should pull to the most positive camber (less negative) side?
26psi in all 4 tires.
 

Attachments

·
Registered
Joined
·
2 Posts
Discussion Starter · #2 ·
Also, based off the specs it should be pulling right. Since it’s not pulling right it leads me to believe this isn’t an issue with my alignment/camber… thoughts?
 
1 - 2 of 2 Posts
Top