JKOwners Forum banner
1 - 20 of 61 Posts

·
Premium Member
Joined
·
2,718 Posts
Discussion Starter · #1 ·
Description:
-Available for the 2-door or 4-door Jeep JK
-High clearance rocker guards are designed to withstand hard impacts and heavy trail use
-Complete coverage from flare to flare and from door opening to below the body mounts
-Numerous attachment points including several stock body mounts
-Fabricated from 3/16" Laser-Cut Steel
-Powdercoated semi-gloss black
-Includes hardware kit
-Best Jeep JK Rocker Guards out there!
-Rubicon tested and trail-approved
-Sold in pairs


CLICK HERE FOR MORE INFO.
 

Attachments

·
Registered
Joined
·
689 Posts
The are really solid! I have a front a rear bumper set up from them as well and the stuff is awesome. The rear bumper is extremely smooth and does not require any effort to open or shut it even with a 37" tire. But back to the rockers, I can't express just how top nitch the quaility is in these rockers. The fit and finish is superb and the protection is fantastic.
 

·
Registered
irate4x4 dot com
Joined
·
1,795 Posts
I know we've got quite a few of these out there now. Any thoughts?
Well. Personally. I won't have my JK until at least January or so but in my process to try to line up a few items I know that are definites on my build.... I am ordering a set of these.
 

·
Registered
Joined
·
272 Posts
I have a feeling I’m going to end up with a lot of Poly gear. Now I just need a JK to put it all on :smokin::smokin:
Same deal here. We can't get the Rubicon model on the island, so I have to wait until I'm back stateside. The only plus side is I'm not chomping at the bit to have the parts released. Figure PolyPro will have everything out for the JK by 2009, so should be good!

I really do want to see what the bumper (front/rear) is going to look like, though, just for drooling purposes.:D
 

·
Registered
Joined
·
158 Posts
Any word on when the PolyP rear bumper/tire carrier will be available or any sneak peaks?
PIG and GOAT1 would be the dudes to talk to on that one, but they're south of the border for the 1000 right now. For the moment we're really focusing on getting our Suspension Components out the door, so the bumpers probably won't be in full production until after the first of the year.

I know that lbh has our prototypes installed, and I don't think the production model is too far off from that design. Until Monday when PIG and GOAT1 return, I'd bug that guy for some pics.

:beer:
 

·
Banned
Joined
·
3,216 Posts
OK, exciting stuff. Thanks Shaggy for that tip. I sent lbh a PM and he does in fact have some PolyP proto's on his badass rig. He sent those to me and I posted them below!

Thank lbh, and by the way, great looking rig. :beer::beer:

The pics are a little small but man is this stuff nice! :smokin: He had some pics of the front winch bumper, rear bumper/tire carrier and a rack for the cargo area.

I really like the front bumper and if I had seen this before I got my Schrockworks stuby I would have gone this route. The rear bumper is what I am interested in though. I have been looking for one and this is the first I have seen and I really want it! PolyP, you hear that! Sell me one, lol!! I will buy a proto and give feedback and post whore it all over!!! :D:beer::beer:

Can't wait, any word on when these are available and I am curious on how Jerry cans would mount...

Here is some words about it;
lbh said:
These are the front and rear bumpers for the JK from Poly Performance. These are prototypes and a few changes will be made from my understanding (I don’t work for Poly). Apparently, Poly is going to make a mount for the lic plate on the passenger side were it wont be sp vulnerable. I also recall the possibility of a High Lift Mount and some mounts for Jerry cans. As for the front, I believe Poly is going to attempt to incorporate the factory fog lamps into the bumper. I have a Warn Powerplant in the garage, and they are currently making a few mods to allow this winch to work with this bumper. The quality of these Prototypes is very very high! With the exception of a few areas of rust (hinge and handle are not coated yet, but I am certain they will be on the production run) The welds are second to none and the overall fit and finish Is great. These bumpers offer a ton of protection. I am certain that Poly will have great success with these as a lot of time and energy went into the development. I know they are looking for feedback with regards to the tire placement. I like it high, but it does cut down on the rear view, you can see out the back with my 37 inch tire. I like it high though as it has great clearance and departure angles. I also took some photos of the rear basket, this was on display at the off road expo. The quality is awesome, I can’t speak enough about Poly’s work quality. The rack does NOT RATTLE and is very strong. In fact it looks factory! The rack doubles the workable storage place. Again, sorry for the night photos, I just wanted to get them to you ASAP. Let me know if you want anything specific. The Jeep is also sitting on Poly Performances Synergy system with the Fox Shocks. Good luck, give Poly Performance a call, they are very helpful and will take as much time as you need to answer questions.


 

·
Registered
Joined
·
689 Posts
Thanks, the guys at Poly do great work. Everyone I talk to who has had experience with them has no complaints. The stuff is great and the prodution stuff will be even nicer if possible. I love the rack in back as well, It is perfect for a frindge, gear etc. Let me know if you want more photos. The Jeep has the Poly Suspension on it as wel, and I can't say enough about it. I will be putting on the Poly Tie rod and other poly itmes in a few weeks and will check back in.
 
1 - 20 of 61 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top