JKOwners Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
131 Posts
Discussion Starter #1
Add one more JK failure to my growing list; The pass side power window has quit. It was working when the door was shut but now it doesn't work at all. I can hear the relay clicking when I push the button either up or down but nothing from the motor. I want to check the wiring at the connector to make sure I have power there but i do not know which pin does what.

Can anyone help?
 

·
Registered
Joined
·
131 Posts
Discussion Starter #4
That site is only listing 2 wires at the connector? Mine has several. They list more for the connector inside the door WTF!
 

·
Registered
Joined
·
2,721 Posts
Mine is the driver door, it was working when the door was shut, but now I have to squeeze the wires or wiggle them.
 

·
Registered
Joined
·
131 Posts
Discussion Starter #8
Fixed it! There was a wire cut in two inside the webbing that the door harness runs through and is the door stop. What a crappy idea Jeep had with this! Its gonna be a re-occurring issue. The wire(blue w/white strip) was cut clean in two well inside of the protective webbing. It looks as if it just stretched to far and snapped.
 
1 - 8 of 8 Posts
Top