JKOwners Forum banner
Cancel

Parting out the Hemi JKU

Jump to Latest Follow
1 - 20 of 24 Posts
C

· Registered
Joined
·
4,748 Posts
Discussion Starter · #1 · (Edited)
Here's what I have available: Text, Call, or PM. 2183403838.


Complete Superlift 4" System with coils, LCA's, All brackets, EVERYTHING! Slightly used. Somewhere around 6 hundo for everything. NO SHOCKS.

Set of custom 1310 Heavy-Wall Driveshafts. May(May Not) have to be re-tubed since the t-case is about 2" behind the XM on the 6.1 Hemi. Might be enough range in them to work fine. Mostly easy highway miles. 1 light wheeling trip to Moab. Still shiny and blask with decals on them. Built by Meritor/Catco in MN. Would cost about $50-$75 each to re-tube. 3 Hundo EACH. INCLUDING ADAPTERS to stock axle/case flanges. if you don't have yokes. SOLD

Rubi Rock Rails. Already trimmed. Hundo. SOLD

Teraflex Badass Tire Carrier. New. 1 Trip. 5 Hundo

Hansen Tire Carrier. Like new. 2 Hundo. SOLD

Four 37x13.5/17 Toyo MT's. 1 month old. 1 trip. Brand New! 14 Hundo. SOLD

Four Spidertrax 1.5 Spacers. Like new. 1.4 Hundo. SOLD

CUSTOM CHARCOAL LEATHER UPHOLSTERED AND HEATED SEATS FOR JKU!! Front and Rear. Only Fronts are heated. Nice! SOLD

Perfectly trimmed FLAME RED OEM fender flares. 1 Hundo. SOLD

Functional Hood Scoop. Duct under hood directs air to filter. 2 Hundo. SOLD

Fancy aluminum fuel door. Non-Locking. Very nice looking. 40 bucks. SOLD

OEM Fuel Tank with OEM Skid Plate. NO PUMP. 1 Hundo.

MAYBE: Like New Trektop NX. 5 Hundo.



 
C

· Registered
Joined
·
4,748 Posts
Discussion Starter · #4 ·
ALASHA said:
You didnt put a price (or pics) of the seats...
Click to expand...
I'll list them on CL for about a Grand and see what happens. They were a 2 grand option from Mopar with installation and wiring. They are basically OEM seats with heaters, leather, and a little added bolstering. The headrests are also wrapped in leather to match. Very comfy! I'll get a pic up in a few minutes. :)
 
R

· Registered
Joined
·
73 Posts
#9 ·
Co4Lo said:
Here's what I have available: Text, Call, or PM. 2183403838.


Complete Superlift 4" System with coils, LCA's, All brackets, Bilstein 5100's, EVERYTHING! Slightly used. Somewhere around a G for everything.

Set of custom 1310 Heavy-Wall Driveshafts. May(May Not) have to be re-tubed since the t-case is about 2" behind the XM on the 6.1 Hemi. Might be enough range in them to work fine. Mostly easy highway miles. 1 light wheeling trip to Moab. Still shiny and blask with decals on them. Built by Meritor/Catco in MN. Would cost about $50-$75 each to re-tube. 3 Hundo EACH. INCLUDING ADAPTERS to stock axle/case flanges. if you don't have yokes.

Rubi Rock Rails. Already trimmed. Hundo.

Teraflex Badass Tire Carrier. New. 1 Trip. 5 Hundo

Hansen Tire Carrier. Like new. 2 Hundo.

Four 37x13.5/17 Toyo MT's. 1 month old. 1 trip. Brand New! 14 Hundo.

Five Mopar Black Ops Wheels. Factory Powdercoat. 1 month old. Not a scratch. 5 Hundo.

Four Spidertrax 1.5 Spacers. Like new. 1.4 Hundo.

CUSTOM CHARCOAL LEATHER UPHOLSTERED AND HEATED SEATS FOR JKU!! Front and Rear. Only Fronts are heated. Nice!

Perfectly trimmed FLAME RED OEM fender flares. 1 Hundo.

Functional Hood Scoop. Duct under hood directs air to filter. 2 Hundo.

MAYBE: Like New Trektop NX. 5 Hundo.



Click to expand...
whats the story with getting rid of the hemi? you can pm me if you dont want to go into detail here. i am interested in both driveshafts and adapters if you can ship to texas (77073). let me know.

thanks
rob
 
C

· Registered
Joined
·
4,748 Posts
Discussion Starter · #10 ·
Not getting rid of the Jeep or the Hemi.
Just building the shit out of it. So I'm selling off the stuff I put on it for Jeep Safari this year, and the stuff that came on it that I won't be using.

If you want the shafts, I can look into shipping them. I think the last one I shipped out was around $50. I also have a few nice spare 1310 joints for them that I'll throw in if you want them. :)
 
R

· Registered
Joined
·
73 Posts
#11 ·
Co4Lo said:
Not getting rid of the Jeep or the Hemi.
Just building the shit out of it. So I'm selling off the stuff I put on it for Jeep Safari this year, and the stuff that came on it that I won't be using.

If you want the shafts, I can look into shipping them. I think the last one I shipped out was around $50. I also have a few nice spare 1310 joints for them that I'll throw in if you want them. :)
Click to expand...
good to hear, i am in the middle of a hemi swap myself. are the shafts basicly stock replacements or could they be used with d60's when i upgrade? dont want to buy if i dont need them...

thanks again..
 
C

· Registered
Joined
·
4,748 Posts
Discussion Starter · #12 ·
Yep, they would work great with your Hemi swap. The length should be near perfect.
When you swap to 60's you ditch the flange adapters and use yokes. So that shortens the DS enough to work fine with the 60's. I re-used the 1310 front DS from my front D44 when I swapped in a 60/14B on my 2-Door. Stretched the rear on that one so had to re-tube the rear shaft. But you should be fine with these.
 
1 - 20 of 24 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
About this Discussion
23 Replies
8 Participants
Last post:
Co4Lo
JKOwners Forum
A forum community dedicated to Jeep Wrangler JK owners and enthusiasts. Come join the discussion about performance, modifications, classifieds, reviews, engine swaps, troubleshooting, suspension, and more!
Full Forum Listing
Explore Our Forums
Modified JK Tech Dept. JK General Discussion Northeast The Welcome Room Stock JK Tech Dept.
Top