JKOwners Forum banner
1 - 9 of 9 Posts

·
Registered
Joined
·
382 Posts
Discussion Starter · #1 ·
I am putting together a OSK for my 2010 Rubi. . .

I have fuses, zip ties, TC clips (both types), hose clamps, starter fluid and a ratchet type tie down strap (used one this weekend to reseat a tire). . .

I know I need U-Joints, but dont know the part numbers. . . .

Hoping the JKO community can help with the part numbers and any other suggestions for the OSK.
 

·
Registered
Joined
·
382 Posts
Discussion Starter · #8 ·
JB weld is the bomb.

At work we have a 270 gal diesel tank for the genset with a curbside remote fill. Stupid delivery driver filled the tank with 100 gals without checking to be sure the tank was venting. Ruptured the tank. 75 gals of diesel fuel on the floor of the parking deck. FD HazMat on scene, mixed up a bit of JB, slapped that shit on the busted seam and whammo, no more leak.




gorilla tape. better 'n duct or 100mph tape.

JB weld. (The 5-minute "JB quik" stuff is great.)
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top