[Fklein6768]

Did similar swap on ps to clear the snork-

Sent from AutoGuide.com Free App

 

[Fklein6768]

Brilliant! I have a set of YJ mirrors that I was just going to throw away. I also have the relocation kit that I never bothered to use because of the passenger side. Thanks!

I used one of these due to the RR jk mounts.

I just threw a little jb weld on a nut and done.

Good write up

Sent from AutoGuide.com Free App

 

[Fklein6768]

Autocrap messing w the phone....

Sent from AutoGuide.com Free App

 

[Fklein6768]

The jk mirror has a female end and the mirror i used on ps has a stud but its not long enough with the bracket. I will take some better pics and post em up tonight.


Sent from AutoGuide.com Free App

 

[Fklein6768]

Removed the bracket/spring fro new mirror. Only hiccup is stud is not long enough to extend thru RR mirror bracket.

Shot of t nut which worked perfectly but was impossible to tighten properly.

Not enough meat on the nut to tack weld so jb weld was used to hold the nut.

Best part about using these is that the mirror is actually functional which the jk mirror was not with these brackets.

Sent from AutoGuide.com Free App

 

[Fklein6768]

Was careful not to get any jb on the threads and these are the ebay mirrors I used. I think they were $30 for the set.

Sent from AutoGuide.com Free App