JKOwners Forum banner

Metalcloak JK Rear Coil Alignment Correction

6K views 3 replies 4 participants last post by  Jadmt 
#1 ·
See less See more
1
#2 ·
I recently installed the 3.5 Game Changer on my 2016 JKU RHR and noticed the bowing of the rear springs while stationary. Is this normal? Wouldn't the bowing effect unevenly weaken the springs. If so, shouldn't this be part of that lift so as to not let the spring prematurely fail/sag?
 
#3 ·
It actually is very normal. It is what happens when you rotate your axle, which has the spring base on it, but do not rotate the spring base back to it's original location.

For the most part, it is not an issue. Your kit will perform as promised, and the springs will last as designed.

This new kit is for the JK Owner who wants to add a little extra, because he can, and straighten out those coils. It's an option, not a requirement.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top