JKOwners Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter #1
Wondering if anyone out there with a manual trans could get me some measurements from the inside of frame rails to a point on the trans. Had to cut out and put in a new crossmember and build a new tranny mount. Trying to figure out exactly we’re it goes before I drill out the holes in the new mount. Thanks
 

·
Premium Member
Joined
·
4,931 Posts
Wondering if anyone out there with a manual trans could get me some measurements from the inside of frame rails to a point on the trans. Had to cut out and put in a new crossmember and build a new tranny mount. Trying to figure out exactly we’re it goes before I drill out the holes in the new mount. Thanks
I'll try and grab a few reference measurements before dinner.

Sent from my SAMSUNG-SM-G891A using Tapatalk
 
1 - 6 of 6 Posts
Top