JKOwners Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
256 Posts
Discussion Starter #1
bought a 2012 JKU and i am looking for kind of a specific cargo liner(if it even exists). What i want is a one piece liner that goes from tail gate to the back of the back seats, then goes up the back of the seats and would allow the seats to be folded down and protect the back of the seats. bonus if it allows the split seats to be folded indapendantly.

gotta keep it protected from the puppy :shitstorm:
 

·
Registered
Joined
·
24 Posts
Quadratecs should work, it's not that cheap hard to bend stuff. I ended uP using truck bed liner cut to fit (two hairy labs) but I bought and fit the quadratec for my cousin
 

·
Registered
Joined
·
263 Posts
I built a Trunk Lid. This is still a work in progress as I might modify it a little bit when I reinstall it after I take the had top off. I based my design from another thread here where someone was making them out of diamond plate, but they were about $700 & the lid didn't hinge. Mine cost me about $100.

Here is the thread of my install.
http://www.jkowners.com/forum/showthread.php?t=56336
 
1 - 4 of 4 Posts
Top