JKOwners Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
2,011 Posts
Discussion Starter #1
Does anybody happen to know what the gauge is of the license plate light wires?

It looks to me like 18 but I'd like to know for sure. Didn't see any markings on the wires themselves.

:beer:
 

·
Registered
Joined
·
962 Posts
Yeah, 18 like all the rest. Whacha doin?
 

·
Registered
Joined
·
962 Posts
No need to do that. Tap into the tail light wire in the bundle that runs on the hinge side of the bed. You can run the wires inside the nylon cover that goes between the bed and the gate. That's what I did and have had no troubles. Make sure you get the running light wire and not the brake or reverse wire.
 

·
Registered
Joined
·
2,011 Posts
Discussion Starter #5
No need to do that. Tap into the tail light wire in the bundle that runs on the hinge side of the bed. You can run the wires inside the nylon cover that goes between the bed and the gate. That's what I did and have had no troubles. Make sure you get the running light wire and not the brake or reverse wire.
Ah, good point. That's what I'll do. Thanks again.
 
1 - 5 of 5 Posts
Top