Joined
·
13 Posts
Being a fan of the pocket in the top of the dash, and wanting to add my Midland MXT400 GMRS radio to my jeep, i wanted to figure a way to install it while still retaining the use of my pocket....and this is what i came up with, after a few trial and errors that is....
![Plant Motor vehicle Vehicle Hood Automotive mirror]()
![Plant Automotive tire Hood Motor vehicle Automotive design]()
![Mirror Light Motor vehicle Green Plant]()
![Motor vehicle Hood Automotive exterior Automotive design Gas]()
And then I decided to "relocate" my OBD connector from under the left dash to a more easily accessible, and less likely to get wet when the top leaks, spot in front of my right leg....
![Office equipment Font Gas Motor vehicle Rectangle]()
![Car Motor vehicle Vehicle Automotive design Automotive tire]()
Just was happy with the results and wanted to share! Happy Jeep'n all!!!!
And then I decided to "relocate" my OBD connector from under the left dash to a more easily accessible, and less likely to get wet when the top leaks, spot in front of my right leg....
Just was happy with the results and wanted to share! Happy Jeep'n all!!!!
