JKOwners Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
56 Posts
Discussion Starter #1
Only selling because I built an F250 front axle and am parting out the Dana 44.

[Teraflex part number 3034413 – original cost $2450 before tax/shipping]

Want your Jeep on 60s? Convert your 44! This is the same Teraflex Dana 60 free float manual locking hub conversion kit for your Dana 44 BUT, unlike the one you order online, this one is complete! The Dana Spicer 1330 to 1350 Crossover U-Joint (5-648X)‎ is purchased and installed connecting the longer TF stub end outer shafts to the inner shafts (also not included in the kit purchased online). This kit is fully assembled and ready for you to simply plug and play to your Dana 44.

The unit bearing will give you the 8x6.5 lug pattern to match the Dana 60 Spicer rear-end assembly you can get from ECGS for under $4k! This kit you buy from me includes the Big Brake calipers with Slotted Rotors and performance brakes (90% life remaining). They are the best performance brake kit Teraflex offers and it works great!

I’ll sell the entire package for $1500 – am willing to negotiate. Any research on this will have you realize this is a steal! I am not willing to separate package unless you find a buyer for the other portion. This is a proprietary kit and they kinda complement each other.

Located in Oceanside, California near the intersection of highway 76 & College Boulevard. -Kevin

Post then DM to negotiate (more pics available). Some items pictured may be for sale in other posts; the fender liners are sold.
 

Attachments

·
Premium Member
Joined
·
5,705 Posts

·
Registered
Joined
·
56 Posts
Discussion Starter #7
ACE engineering fender liners - they looked good but didn't fit and I had to cut them despite the factory application at the time. After I went with a coilover set up - they definitely didn't fit.
 

·
Registered
Joined
·
45 Posts
Only selling because I built an F250 front axle and am parting out the Dana 44.

[Teraflex part number 3034413 – original cost $2450 before tax/shipping]

Want your Jeep on 60s? Convert your 44! This is the same Teraflex Dana 60 free float manual locking hub conversion kit for your Dana 44 BUT, unlike the one you order online, this one is complete! The Dana Spicer 1330 to 1350 Crossover U-Joint (5-648X)‎ is purchased and installed connecting the longer TF stub end outer shafts to the inner shafts (also not included in the kit purchased online). This kit is fully assembled and ready for you to simply plug and play to your Dana 44.

The unit bearing will give you the 8x6.5 lug pattern to match the Dana 60 Spicer rear-end assembly you can get from ECGS for under $4k! This kit you buy from me includes the Big Brake calipers with Slotted Rotors and performance brakes (90% life remaining). They are the best performance brake kit Teraflex offers and it works great!

I’ll sell the entire package for $1500 – am willing to negotiate. Any research on this will have you realize this is a steal! I am not willing to separate package unless you find a buyer for the other portion. This is a proprietary kit and they kinda complement each other.

Located in Oceanside, California near the intersection of highway 76 & College Boulevard. -Kevin

Post then DM to negotiate (more pics available). Some items pictured may be for sale in other posts; the fender liners are sold.

Hey man, I'm interested and not located too far from you. sending my number in a dm
 
1 - 10 of 10 Posts
Top