JKOwners Forum banner
Cancel

JK Custom Roll Cage by KMA Fabrication

16128 Views 29 Replies 12 Participants Last post by  stralph, 
sierraexplorers
4
Look what KMA Fabrication started in my JK. I have looked at different options for the JK and KMA has come up with the best I have seen. It ties into the front pillar and seems to be very strong. He has made a cage that goes all the way to the floor but I wanted all the leg room I could have so Scott designed this one for me. The mounts are 1/4" and are gusseted very well. It doesn't block the speaker mounts and the factory plastics are trimmed to keep the factory look.




I will get more pics up as soon as KMA Fabrication finishes it.
See less See more
Reply
Save
Like
21 - 30 of 30 Posts
stralph
cage

Dr.Dirty said:
how much $$$$$$$$$$

PM me price im interested
Click to expand...
price will depend on what you want (number of bars in cage)
Reply
Save
Like
Dr.Dirty
i was just interested in the front mounts thru the dash i have acess to DOM and a tube bender and really nice welder i just would need the brakets if your willing to just sell them
Reply
Save
Like
stralph
Dr.Dirty said:
i was just interested in the front mounts thru the dash i have acess to DOM and a tube bender and really nice welder i just would need the brakets if your willing to just sell them
Click to expand...
not just brackets. Afraid of copy cats. Sorry.
Reply
Save
Like
CLACKEY(_!_)
stralph said:
not just brackets. Afraid of copy cats. Sorry.
Click to expand...
I would have been interested in the brackets also.
Reply
Save
Like
Dr.Dirty
stralph said:
not just brackets. Afraid of copy cats. Sorry.
Click to expand...
well what does a builders kit consist of ?

im very unhappy with my rockhard cage and im looking to make my own i just cant bend 14 plate lol

and dont want to spend $$$$$ on shipping
Reply
Save
Like
stralph
Dr.Dirty said:
well what does a builders kit consist of ?

im very unhappy with my rockhard cage and im looking to make my own i just cant bend 14 plate lol

and dont want to spend $$$$$ on shipping
Click to expand...
The price starts at $400 + shipping for the front part and you can add more bars . That includes my brackets A-pillar bars (1 3/4") two dash bars (1 1/4")
upper and lower . If you need more bars let me know .
All bars are cut and notched.
Reply
Save
Like
ASTAR
Interested...a few questions.
1) Any word on the through the dash to the floor option?
2) Did you get pics of the plastic all put back in place?
3) How about using the 1 3/4 tube on all pieces instead of reducing to 1 1/4? Possible?
4) Where did you relocate the tweeters to?

Thanks
Reply
Save
Like
stralph
ASTAR said:
Interested...a few questions.
1) Any word on the through the dash to the floor option?
2) Did you get pics of the plastic all put back in place?
3) How about using the 1 3/4 tube on all pieces instead of reducing to 1 1/4? Possible?
4) Where did you relocate the tweeters to?

Thanks
Click to expand...
1. Have not finished yet . 2. yes on my website . 3. totally posible . 4. I put them in the cage . THANKS
Reply
Save
Like
tkob1060
what about strengthening the rear at the tub? Its just spot welded to the tub
Reply
Save
Like
stralph
cage

tkob1060 said:
what about strengthening the rear at the tub? Its just spot welded to the tub
Click to expand...
So is the rest of the factory cage . And if you need more thats what I do . Thats why I'm a costum shop . So I'll build it any way you want .
Reply
Save
Like
21 - 30 of 30 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
JKOwners Forum
A forum community dedicated to Jeep Wrangler JK owners and enthusiasts. Come join the discussion about performance, modifications, classifieds, reviews, engine swaps, troubleshooting, suspension, and more!
Full Forum Listing
Explore Our Forums
Modified JK Tech Dept. JK General Discussion The Welcome Room Stock JK Tech Dept. Electrical & Lighting Tech Dept.
Top