JKOwners Forum banner

JK Custom Roll Cage by KMA Fabrication

16155 Views 29 Replies 12 Participants Last post by  stralph
Look what KMA Fabrication started in my JK. I have looked at different options for the JK and KMA has come up with the best I have seen. It ties into the front pillar and seems to be very strong. He has made a cage that goes all the way to the floor but I wanted all the leg room I could have so Scott designed this one for me. The mounts are 1/4" and are gusseted very well. It doesn't block the speaker mounts and the factory plastics are trimmed to keep the factory look.

I will get more pics up as soon as KMA Fabrication finishes it.
See less See more
1 - 1 of 30 Posts
The cage worked great. A friend rode in it at Moab and he loved the handles. Thanx again.
Man, that looks awesome! Nice work on that setup!:beer:

Can you post up pics from the inside after you put the plastic trim pieces back on, or did you leave them off?
1 - 1 of 30 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.