JK Custom Roll Cage by KMA Fabrication

16157 Views 29 Replies 12 Participants Last post by stralph, Aug 23, 2009

sierraexplorers

Discussion Starter · Mar 30, 2009 (Edited)

Look what KMA Fabrication started in my JK. I have looked at different options for the JK and KMA has come up with the best I have seen. It ties into the front pillar and seems to be very strong. He has made a cage that goes all the way to the floor but I wanted all the leg room I could have so Scott designed this one for me. The mounts are 1/4" and are gusseted very well. It doesn't block the speaker mounts and the factory plastics are trimmed to keep the factory look.

I will get more pics up as soon as KMA Fabrication finishes it.

See less See more

Save

1 - 1 of 30 Posts

brokenleaf

· #10 · Mar 31, 2009

stralph said:
Thanks Jer for the pics.
The teeter speakers have to be moved for this option.They are easy to put anywhere else.The mount on this roll bar is 1/4 steel and bolts in the factory bolts for the dash and two more wholes are drilled in the pinch weld under the windshield.This cage is a weld in application,I will make this a builders kit as soon as it's all done.

I'd be down for a builders kit. Is it possible to run DOM tubing all the way down through the dash to the floor? Even if I had to replace the AC vent tubing, I would rather do that. Thanks!

Jeff

Save

1 - 1 of 30 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month