JKOwners Forum banner
1 - 20 of 128 Posts

·
Vendor
Joined
·
1,317 Posts
Discussion Starter · #1 · (Edited)
I'll continually update this thread with all JeepSWAG product news.

Please subscribe to this thread, if you are interested in receiving updates about Dominion OffRoad products. Available at JeepSWAG.com


=================================================

Demon Duffelz Headrest Storage Bags
- $19.95 each
Updated 11/9/2017

CLICK FOR MORE DETAILS


=================================================

Customized Staun and Coyote Tire Deflators - We now preset, to your requested pressure, all tire deflators.
- Customized pressure
- Lowest Price
- Free USA Shipping
CLICK FOR MORE DETAILS
Last updated 2/2/16



=================================================

JeepSWAG Bare Naked Extreme Front Bumper $150
Last updated 2/2/16
Link to more details and BUY IT HERE



=================================================

JeepSWAG Badass Stainless Steel Shovel
Last updated 12/1/15
Link to more details and BUY IT HERE



=================================================

Dominion OffRoad Interior Hi-Lift Jack Mount Kit
Last updated 12/1/15
Link to more details and BUY IT HERE


=================================================


Domininon OffRoad Hi-Lift Accessory Bar Kit Link to More Details and BUY IT HERE


=================================================


JeepSWAG / Viair On-Board Air Systems

2012 Kits shipping soon.

Pre-12 kits have been shipping are getting rave reviews. We sell all JK OBA Components too.



In-Cab Air Couplers:


Filling 4 tires at once Vid:


==================================================


Dominion OffRoad / Dirt Bagz Saddle Bag Storage Kit
Link to more details and BUY IT HERE








=================================================


Dominion OffRoad Under Back Seat Storage Bag Kit
Last update: 12/1/15
Availability: Now Shipping
Link to more details and BUY IT HERE




=================================================


JeepSWAG Hi Clearance Muffler Relocation Kit

Last update: 1/25/10

Availability: Orders start shipping at the end of next week.

The kit comes with rear sway bar lowering brackets. Pipe runs over the rear swaybar. This allows the tailpipe to come out the back at a downward angle. The off road tip is short with a downturn at the end. No more smashing tips under the rear frame rail.

All mandrel bent stainless steel pipe

Quiet deep tone 14" stainless steel muffler.

For those who purchased my original muffler relocation kit, a trade in program is available. You'll get 50% off for your old kit.

Kits are shipping.

LINK TO PICS AND PRICING DETAILS




=================================================



JeepSWAG Aramid Winch Rope

Last update: 1/25/10

I set out to determine what is the very best Synthetic rope material and determine if I'll be able to offer it as a Winch Rope. Aramid with similar strength, UV resistance, and ability to go around blocks and sheaves as other Synthetic Rope offers superior abrasion and heat resistance. The material was originally developed for use on conveyor belts and as it turns out winch rope has many of the same requirements.

- 3/8" Aramid fiber Rope - 18,000 lb. average tensile strength - 400 degree critical temp (as compared to 150 degree for Dyneema/Amsteel)
- Crush Proof Super Heavy Duty Thimble

LINK TO PRICING AND DETAILS

Post up in this thread, for forum member's pricing.
 

·
Vendor
Joined
·
1,317 Posts
Discussion Starter · #5 ·
Glad to see that I can rely on the local hooligans, to chime in.

The six rear bolts that hold the hard top on, are causing the hard top to crack. This kit will act as a large washer to stop the cracking. Just me picking up where Jeep left off again....

 

·
Vendor
Joined
·
1,317 Posts
Discussion Starter · #8 ·
Damn woods, do you keep a note pad by your bed for when you dream up all this stuff hahahah!:beer:
When Jeepin turns into work, it's no longer a dream. It's a nightmare. :shaking:
 

·
Vendor
Joined
·
1,317 Posts
Discussion Starter · #10 ·
are the rails going to be angled up or straight out?
The rails are pre-cut so they angle up. But depending on how high you weld them onto the rock rails, they are level with the top of the rock rail, or above it.
 

·
Registered
Joined
·
6,371 Posts
got any CAD drawings of them yet?
I'm on the fence, I REALLY like redrocks, but if these will be similar for less than half the cost then cool!
 

·
Vendor
Joined
·
1,317 Posts
Discussion Starter · #12 ·
got any CAD drawings of them yet?
I'm on the fence, I REALLY like redrocks, but if these will be similar for less than half the cost then cool!
No CAD drawings on these, they went strait to prototype. My goal is to have some pics up on Tuesday.
 

·
Vendor
Joined
·
1,317 Posts
Discussion Starter · #16 ·
Keep us in the loop about the SOCal powdercoat/weld meet you might organize. I am down for that!
If you're interested in a group weld/powder coat deal, please send me a PM.

Seal20, I've got you on the list :beer:
 

·
Vendor
Joined
·
1,317 Posts
Discussion Starter · #19 ·
Hey Brett- the Rubi-Tubes look great. I def want to install a set on my JK.

I was looking on your website www.jeepSWAG.com at the pics and I think I will be ok, but my rails have been chopped down and measure 74.5" in length in the center. How long overall are your Rubi-Tubes that you have listed at www.jeepSWAG.com ?
The tubes are 71" long. The way that I have them mounted in the picture, there's about 3" from the back of the rail, to where the tube starts. I tried to leave plenty of room for trimming.

I've got ya on the list. :grinpimp:
 

·
Vendor
Joined
·
1,317 Posts
Discussion Starter · #20 ·
Update

9/10/08 Update

Rubi-Tubes:
- Link to Pre-Sale discounted shipping page has been added

JeepSWAG Hi-Clearance Muffler Relocation Kit:
- Pictures and details have been added to the muffler section above
- Link to pre-sale free/discounted shipping has been added

JeepSWAG Hard Top Saver Kit:
- - Link pre-sale free/discounted shipping has been added
 
1 - 20 of 128 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top