JKOwners Forum banner

I need some bolt size data

1361 Views 3 Replies 2 Participants Last post by  JR
I am working on the design for a JK Hi-Lift Jack Hood Mount.

I am wondering if anyone can tell me the size of the 4 bolts that hold the hood to the hinge.

I need bolt size x thread pitch x length.

Thanks
Jason
1 - 4 of 4 Posts
Yeah I have that info, let me run out to the shop real quick
M8-1.25 for dia and thread
stock bolts are about 20mm of thread and about 8mm of conical taper to the head surface (they're countersunk)

To bolt on 1/2" stock over the hinges, I used M8-1.25x40 allen head
Perfect, that's all I needed to know!

My bracket adds about 26mm to the mix, so probably 50mm long...

JR
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top