JKOwners Forum banner
1 - 2 of 4 Posts

· Registered
Joined
·
844 Posts
Discussion Starter · #1 ·
I just got my hydro assist installed and im curious how some of you guys ran the lines. I know PSC instructs to run the lines OVER the trackbar which is what i have now, but i feel running it over the trackbar prevents the line from moving freely especially when the drivers side drops. I originall had it running under the trackbar but i was worried the trackbar could pinch the line against the diff, but besides that it actually seemed like a better route compared to over the trackbar. Im using two 90* fittings on the ram both facing torqards the drivers side. I can post pictures once i get home

Do some of you have pictures of your lines? Im very curious how everyone else did theirs
 
1 - 2 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top