JKOwners Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
339 Posts
Discussion Starter #1
When I push the stalk to engage the high beams, they flash on and then go back to low beams in the forward position with the blue high beam light on.

When I pull the stalk and hold it, same thing- they flash on for a split second and then go back to low beams.

Has anyone had this happen before? Looking for a quick fix to avoid a trip to the dealer.

Thanks
 

·
Registered
Joined
·
108 Posts
Pulling the stalk will always just flash it (I think). There's probably a short to ground somewhere in the highbeam wire and the Canbus is shutting down that circuit.
 
1 - 3 of 3 Posts
Top