JKOwners Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
3,341 Posts
Discussion Starter #1
An evap line cracked and I fixed it by cutting out a section and installing a piece of hose. If I ever remove the tank, I want to install a new line. The problem is the parts manuals suck balls and I can't really identify which line it is. I think it might be #7

I'm borrow a couple of pictures to show what line is needed.

Picture of the line

jk_fuel_tank.jpg


Picture from the parts catalog
http://www.factorychryslerparts.com/showAssembly.aspx?ukey_assembly=1122225&ukey_make=1064&ukey_model=15533&modelYear=2013&ukey_category=20311

lines.jpg
 

·
Registered
Joined
·
420 Posts
Counting the bends from the connector it looks like it may be 6 to me. But you're right, the manual sucks.

If the choice is between 6 or 7 I would say 6. But if it's 7 or 8 that I'm looking at I would say 7.

Good luck with that.
 
1 - 2 of 2 Posts
Top