JKOwners Forum banner

1 - 11 of 11 Posts

·
JkO Approved Vendor
Joined
·
244 Posts
Discussion Starter #1 (Edited)


Diode Dynamics is proud to introduce a revolutionary new product: PRISM multicolor LED bulbs, for direct replacement in any fog light application. This is an exclusive, unique product, designed and developed by Diode Dynamics LLC.


The kit includes two bulbs and remote control. Set the lights to white or amber to drive around, with the normal nice look of white LEDs. They'll stay on that color until you change it.


When you want to show off, pull out the remote control, and amaze your friends as the fog lights change color! There are 9 preset colors, but you can also program 5 colors to whatever you'd like!


The small addition of color sets the whole vehicle off with a new look, and will turn heads every time! No one will believe you can change the color of your lights with a remote control!

The whole system is 100% plug-and-play: just replace your factory bulbs, and plug the power wire into your factory socket.

Included in your order:


- Two RGB Multicolor 30-5050 SMD bulbs in your Wrangler's bulb size
- Power connector wire (plugs directly into your factory socket for simple installation)
- One Radio-Frequency remote control


This product is intended as a cosmetic upgrade only. Not for low-beam use

All of our products come with a 30-day satisfaction guarantee and a 3-year limited warranty.



If you have any questions or comments please feel free to email us at [email protected] Post, PM or call: (314) 205-3033


*PM us for the free-shipping code* (U.S. forum members only)


Thanks for looking!
Nick C.
Diode Dynamics
 

·
JkO Approved Vendor
Joined
·
244 Posts
Discussion Starter #3
how is the light output? Same as stock?
These are intended primarily as a cosmetic upgrade and are not going to give you more usable output.

If you are looking for usable output, we have white LED replacements, as well as HID conversion kits

This is with a simple plug and play XP80 LED:



Nick C.
 

·
JkO Approved Vendor
Joined
·
244 Posts
Discussion Starter #5
How much are your fog lights hid conversion for the 6000K? You can im me, thanks
Our HID conversion kits start at $150

We also have LED fog light options available that will produce plenty of usable output

Feel free to give us a call if you need more information: (314) 205-3033

Thanks!
Nick C.
 

·
Registered
Joined
·
2,770 Posts
Can you tell me about the HID fog light conversion... What's all to it? Is it easier then the a headlight conversion? Thx, kev
 

·
JkO Approved Vendor
Joined
·
244 Posts
Discussion Starter #7 (Edited)
Kevin,

The HID fog light conversion is a very simple plug and play installation, but the LEDs are even easier.

With our XML2 LED you simply take out your factory bulb and plug the XML2 in it's place.

The XML2 will produce plenty of usable output for the fog light application (1,420 lumens)

Feel free to give us a call for more information: (314) 205-3033

Nick C.
 

·
Registered
Joined
·
2,770 Posts
I'd love to do led's but they don't produce enough heat to keep the ice from building on them that's why I need to go with the HID setup... How much $ is that again? Edit: sorry I saw it... $150 thanks
I have to get Ruby some new shoes and socks and then I'll get those!
 

·
JkO Approved Vendor
Joined
·
244 Posts
Discussion Starter #9
I'd love to do led's but they don't produce enough heat to keep the ice from building on them that's why I need to go with the HID setup... How much $ is that again? Edit: sorry I saw it... $150 thanks
I have to get Ruby some new shoes and socks and then I'll get those!
Feel free to give us a call if you need more information: (314) 205-3033

This is the biggest sale of the year and it ends tonight!

Nick C.
 
1 - 11 of 11 Posts
Top