JKOwners Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
199 Posts
From the FSM:

The hydraulic lifters are a roller type design and are positioned in the cylinder block with the lubrication whole facing upward. The lifters are aligned and retained by a yoke and a retainer .

Lifter alignment is maintained by machined flats on lifter body. Lifters are fitted in pairs into six aligning yokes. The aligning yokes are secured by a yoke retainer .


Maybe they should proof-read the manual (lubrication whole).
 
1 - 2 of 2 Posts
Top