[notarubicon]

Where have you guys mounted your cb antennas i need some ideas please:beer:

 

[gcg]

Cool Tech has a nice CB mount that goes inside the rear license plate bracket. The antenna itself just emerges from a hole in the top of the plastic bracket. All wiring is internal. I'm using this on my Jeep and like it quite a bit. Here's a link to their site:

http://www.cooltechllc.com/jeep/jk_ultramount.htm

 

[BigO]

I went with the TeraFlex mount. It bolts to your tire carrier mounting bolts. Works very well & gets the top of my antenna above the roof. They have a stainless version too.

 

[igofshn]

I drilled a hole in my stock tire carrier. Works great. I had already cut off my 3rd brake light so there is plenty of room.

 

[Bigjerm]

x3 on the stock carrier. Bought a bracket on Amazon.com that is used to go around trucker mirrors. I just drilled a new hole in the flat part of the bracket and it works just fine. The bracket and Co-axle cable was only like $15

 

[John L]

I drilled a hole in my stock tire carrier. Works great. I had already cut off my 3rd brake light so there is plenty of room.

me too...

 

[scrogg]

I went with the TeraFlex mount. It bolts to your tire carrier mounting bolts. Works very well & gets the top of my antenna above the roof. They have a stainless version too.

x2

I'll soon be ugrading to thier 3rd brake light bracket that has an integrated CB antenna mount.

 

[Rollbar13]

I plan on putting mine on or around the tire carrier, just waiting for my CB to arrive to install it.

 

[mrsig]

On the tail gate!! Very easy to make if you can weld.

 

[Big A]

Here is my CB antenna install... It's a bit different that what everyone else uses, But is very functional
http://www.jkowners.com/forum/showthread.php?t=1465

 

[JeepDog]

I used a universal mount and put it on the backside of the stock License plate bracket....

It actually, to me, looks factory, I have done others that do the same thing...