JKOwners Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
116 Posts
Discussion Starter · #1 ·
Are C gussets and / or sleeves needed with 35" tires? I'm just about to install my lift and 35s and am wondering if this is something that I should do first. Is anybody with 35s having issues, or is it more with 37s or bigger? Is it the Cs or tubes bending, or both? I've read a lot of posts on different forums and some say that the Cs are the only thing you have to worry about and others say it's only the tubes. What's everybody here's opinion on this??
 

·
Registered
Joined
·
116 Posts
Discussion Starter · #4 · (Edited)
I also am doing mine. I run 35's also.

I think for the gussets it is more about how hard you drive your rig then the size of tire. I mean, obviously a 50" tire will be harder on it but I don't really think anything in the 30's and above are too "small" to justify doing it if you wheel a lot

Are you doing it yourself, or having a shop in Denver do it? The only thing that's really stopping me from doing it is the fact that I've never touched a welder in my life, so I'd have to find a shop that could do it for me. Any recommendations? I've worked with Crawlertech in the past, they did a great job on my TJ.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top