JKOwners Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
3,998 Posts
I sleeved and gusseted mine. I bent the inner c with 35's so I figured while I had the axle apart doing the gears and gussets I might as well sleeve it. I will probably add a tube brace on the longer tube as well just for a little more insurance. I do beat on mine pretty good so if you don't you might should be ok with just the gussets.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top