JKOwners Forum banner
1 - 1 of 39 Posts

· Registered
6,193 Posts
No way on the c clamps. Get the bj press, autozone and advance should have the loaner tools if you don't want to buy one.

Check doc's and woods videos for installation. Sorry if it wasn't such a pain on my phone I would link them for you. Seems doc cut a piece of tubing to make the correct spacer for installing or removing (been a while since I watched it) because the standard kit didn't come with the one he needed.

I would never put in ball joints with the intention of reusing them later. I'm sure it's possible if you didn't damage them coming out but if you are looking at spending pr44 bucks in the future I don't see the benefit of saving a few dollars on used bj's.
1 - 1 of 39 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.