JKOwners Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
976 Posts
I would pull the diff cover and see if when the install was done, that the lower axle tube drain hole or notch was done. Also make sure that the proper amount of fluid is put in it. These are both issues that will cause this. I had to deal with this myself. I don't think my installer knew how to read! ARB has the warning about this problem and what will happen in the instructions!
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top