[JKDinker]

Does anyone make a Poly one? Energy and Daystar do not make one yet. Who else can I check with? I have a lot of movement with my Atlas 4sp hanging off the end of it. Roark Fab Works makes a ring put not sure on it. Read pros and cons on Pirate. Trying to tighten my shit up, the Transmission rubber one is really squishy. Any Ideas?

 

[cjcraig7]

I did. I will try to find a picture.

EDIT: Closest that I got Larry.

I built a custom length tube and poly insert the full width of the new transmission base plate (1/4") - about 7 inches wide.

 

[JKDinker]

Looks good Craig. I need to do something similar. I pulled my skids off to rework my exhaust, and you can move the Atlas up and down at least a 1/2 to 3/4" of a inch. I noticed I kept breaking the exhaust hangers. Motor mounts look fine. I think its just too much weight bouncing off the end and moving side to side with that weak rear transmission mount. Energy suspension wants a picture today. They are going to see if they can make something work. Thanks and have a Happy Thanksgiving buddy with your family.

 

[cjcraig7]

Looks good Craig. I need to do something similar. I pulled my skids off to rework my exhaust, and you can move the Atlas up and down at least a 1/2 to 3/4" of a inch. I noticed I kept breaking the exhaust hangers. Motor mounts look fine. I think its just too much weight bouncing off the end and moving side to side with that weak rear transmission mount. Energy suspension wants a picture today. They are going to see if they can make something work. Thanks and have a Happy Thanksgiving buddy with your family.

Same thoughts here. I am installing a crawler box this year and the mushy OEM mount didn't appear to be firm enough for the added weight/leverage.

Thank you for the Thanksgiving wishes, to you and yours, I thoughtfully extend the same.

 

[Imped]

I wouldn't bother with an Energy poly replacement.....Craig's solution is much nicer and would be a piece of cake. You're seeing just how soft and compliant these things are from the factory. While the motor mounts are probably fine, they deflect a lot. You'd be amazed at how nice some stiffer motor mounts and a trans mount that doesn't deflect nearly as much feel. Better throttle response, tighter feel, less drivetrain movement.