JKOwners Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
1,366 Posts
Discussion Starter · #1 ·
as apposed to buying a bolt in cage, me and a couple buddies been talking about taking some DOM and making some cage additions to the OEM. Would essentially follow the OR Fab type but would be tube through the dash as opposed to the flat part beside it. my my buddies can notch and weld the tubing so I am considering it.

anyone added tubing cage to a JKU?

pics, tips, tricks?

Thanks.
 

· Registered
Joined
·
346 Posts
Have you taken a look at the poly kit? Sounds like what your looking for.
 

· RIP Brad
Joined
·
2,898 Posts
as apposed to buying a bolt in cage, me and a couple buddies been talking about taking some DOM and making some cage additions to the OEM.
You're on the right track, but why not just remove the stock stuff if you're already going to this extent? I believe there are a few threads here that chronicle other user's builds, including cages.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top