JKOwners Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
So I have a JKU 3.6L that I bought of my dad that is lifted and cold air intake. A couple of weekends ago me and my son was driving down a dirt road lost the lower coolant line. After replacing all the coolant lines and thermostat. Some reason the fan doesn't turn on now. Well it turns on if I turn on the A/C or if I took up my buddies SnapOn Triton D8 scan tool to it and trigger the fan to come on it got straight to high. If it just start the jeep and let it sit the fan never comes on at all and it will over heat. I'm a bit lost on whats left to replace. I have checked all the relays and fuses in the TIPM. Suggestions?
 
1 - 1 of 1 Posts
Top