I installed my 2010 JKU Hard top on my 2012, everything fits well and is pretty tight, no wind noise and passed the hose spray test shot directly in the seals for good 5 mins all around, gonna leave it on until it rains a few times for a good real world test. All holes line up, 2 bolts front and 6 bolts rear, the last 2 rear bolt holes are a bit different in that one side of the notch is missing on the tub and you have to hold the clip/nut piece up until it threads, when removed the can be stored in the hardtop storage bin the back of the Jeep. I'll get picks up later today and update this when it rains. I had this top left from my 2010 and hoping to save about $2400 for a new one or the 1600 for dual top group. I don't have the wiring in the 2012 to run the wiper or the hose for the fluid squirter in the back (yes its a technical term lol)
Disclaimer: I'm not recommending this to any and can't be held responsible when yours leaks or flies off going down the road ect. if you do the same thing. Just passing along information as found for the new 2012s.
I wonder if this is the kit to get the 2010 hardtop to work with my 2012 http://www.quadratec.com/products/11190_0058.htm
2012 Red JK Unlimited Rubicon, 1984 Black CJ Scrambler
2010 White JK Unlimited Rubicon - Traded, 2008 Burgundy XK Overland - Traded
Last edited by Scrambler84; 10-18-2011 at 10:43 AM.