So here it is, my write up cherry getting popped.
I've always liked the look of the black wheels on a black car, but I've left the outer ring silver.
Pretty easy, treat it like any other surface, clean, mask, sand, clean, spray. I used three coats on mine with the first one being super
light, and a fourth one from farther away for
the can recommends 150-180 grit, that took too long so I went with 80, I figure it'll give me more to hold on to.
once this dries, I sprayed it from about 12-15" away for better texture. I'll be loading pics once on the jeep.
Post some pics up if you've done this, I want to see how it's holding up.
Also, I'm curious to see how much of a difference using finer or coarser sand papers makes.